Chargers

"I personally use Hyperion chargers, a decision based upon their earlier models. Rugged and strong case, easy menu systems with a wide range of settings, logical displays and well supported here in New Zealand under warranty. This one is my favourite due to its pre-installed AC power converter. Bigger and more powerful units are now available, however I don't charge my batteries at 10amps! And I doubt you really need to either."

Hyperion 606i AC/DC charger/balancer $199 incl GST

TITAN
energy
Ltd
Hyperion EOS 0606i 6S 6A max CHARGER AC/DC now with STORE MODE. Integrated LBA balancer for LiPoly(3.7v), LiFePO4/A123(3.3v). Also Nicd, NiMH, and Lead-Acid charge modes. Dataport for PC software. 11v~15VDC and 100v~240V AC Inputs - Hyperion and XH Balance Multi-Adapter included for 2S to 6S packs!
Hyperion EOS 0720i NET3 AD, 1S-7S, max 20A, 150W DC and 90W AC charger with built in Lithium Balancer.
•Next-generation 0720i NET charger for 110-240V and >15VDC
•Perfect for home as well as the field or track
•Adapter boards for Chinese types (XH), German brands and of course Hyperion is included - everything you see on the picture is in the box!
The EOS 0720i NET3-AD charger combines the best of both worlds. Up to 7S lipos (support all other popular chemistries too) and up to 20A raw charging power. With the built in balancer you keep your lipos healthy and safe.
The 240V input provides 90W of input power where when on DC (up to 15V) you have 150W at your disposal.
The EOS 0720i NET3 AD is the answer when looking to upgrade to more power but where you still have the flexibility of the built-in power supply.
The NET3-AD is the most powerful AC/DC charger available today. With AC input, it can charge a 5000mAh 2S car pack at more than 2C (~11.5A) and on DC nearly 4C (~19A). Or on AC a 3S 2100mAh pack at can hit almost 4C, and on DC input up to 6C!
EOS 0720i NET3 AD (ac/dc input)
  1. 5V~29V DC (20A, 150W max charge)

100V~240V AC (20A, 90W max charge)

SYNC Charge up to 2x7S for max 14S Flightpacks at 300W max. See explanation of SYNC MODE charging below.
80W Imax B6 charger , with AC Power Supplier ( 15V 5A) $99incl GST
Operating voltage range: DC10.0~20.0Volt
 AC to DC adaptjor(DC10.0~20.0V/6A)
15V 6A is recommened,
(Please reduce charge current accordingly when adaptor is less than 80W)
Circuit power: Max.charge power 80W
                      Max.discharge power 10W
Charge current range: 0.1~6.0A
Discharge current range: 0.1~2.0A
Current drain for balancing Li-po: 300mAh/cell
NiCd/NiMH battery cell count: 1~15cell

Hyperion 720i AC/DC charger/balancer $299 incl GST

Input voltage 11.0-15.0V DC or 100~240V AC at 50~60 Hz
1-14 NiMH - Nickel-Metal Hydride cells
1-6 LiPo - Lithium Polymer cells, 100~6000mAh (3.7V/cell type only)
1-6 LiFe - Lithium Iron (3.3V/cell types, inc. A123 brand cells / LiFePO4 cells)
1-6 Lead-Acid cells (2V per cell nominal)
Charge current 0.1A ~ 6.0A MAX, by 100mA steps (50W limit)
Discharge current 0.1A ~ 1.0A MAX, by 10mA steps (5W limit)
Trickle charge current (NiCd, NiMH) 0 ~ 200mA
Charge termination "Delta V" peak detection for NiCd/NiMH
"CV/CC" for Lithium and Lead-Acid Batteries
Cycling Modes (NiCd, NiMH) Charge>Discharge or Discharge>Charge
Display type 2-line, 16 character blue backlit LCD